Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Small loss level in microstrip line at 60 Ghz

Status
Not open for further replies.
S

Salving

Member level 1
Member level 1
Joined
Mar 31, 2012
Messages
35
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,515
I've designed simple microstrip line on rogers 4003 substrate (extrapolation tan delta = 0.0062 @ 60 GHz) in freq. band of 60 Ghz. CST showed small loss level of about 0.1 - 0.2 dB for 10 mm line. I tried to increase meshing but it didn't help. What could be the reason of that small loss level?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top