Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Slot antenna array design

Status
Not open for further replies.
W

winglj

Full Member level 4
Joined
Feb 21, 2005
Messages
195
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,063
slot antenna array

Hi, everyone. I am wondering whether I can find any good tutorials or reference for the slot antenna array design? Can it be realized by PCB but not waveguide. I appreciate any information about it.
 

I think it's possible. You can check out the following papers (and their references) for some ideas.

John

J. Hirokawa and M. Ando, "Sidelobe suppression in 76-GHz post-wall waveguide-fed parallel plate slot arrays," IEEE Trans. Antennas Propagat., vol. 48, pp. 1727 - 1732, November 2000.

J. Hirokawa and M. Ando, "Efficiency of 76-GHz post-wall waveguide-fed parallel-plate slot arrays," IEEE Trans. Antennas Propagat., vol. 48, pp. 1742 - 1745, November 2000.
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
Mr. winglj have u got any soln to ur problem? if so plz share it. i m also facing the same difficulty
 

do you use from microstrip patch antenna?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top