manoharagn
Newbie level 5
sir i got output to display time in lcd using 89s52.but i need the help whenever i press the switch in the board the time will start from beginning using external interrupt.
here is the code how to modify the code.
here is the code how to modify the code.
Code:
#include<reg51.h>
#define cont_port P3
#define port P1
#define dataport P2 // Data port for LCD
#define m_sec 10
sbit rs = cont_port^0;
sbit rw = cont_port^1;
sbit en = cont_port^6;
sbit dig_hr1=port^0;
sbit dig_min1=port^1;
sbit start=port^2;
sbit am_pm=port^3;
int hr ,hr1=0;
int min,min1=0;
int sec,sec1=0,dig_am_pm=0;
void delay(unsigned int msec) // Time delay funtion
{
int i,j ;
for(i=0;i<msec;i++)
for(j=0;j<1275;j++);
}
void lcd_cmd(unsigned char item) // Function to send command on LCD
{
dataport = item;
rs= 0;
rw=0;
en=1;
delay(1);
en=0;
return;
}
void lcd_data(unsigned char item) // Function to send data on LCD
{
dataport = item;
rs= 1;
rw=0;
en=1;
delay(1);
en=0;
return;
}
void lcd_data_string(unsigned char *str) // Function to send string on LCD
{
int i=0;
while(str[i]!='\0')
{
lcd_data(str[i]);
i++;
delay(1);
}
return;
}
lcd_data_int(int time_val) // Function to send number on LCD
{
int int_amt;
int_amt=time_val/10;
lcd_data(int_amt+48);
int_amt=time_val;
lcd_data(int_amt+48);
}
void lcd(unsigned char str1[10]) // Function to initialize LCD
{
lcd_cmd(0x38); //2 LINE, 5X7 MATRIX
lcd_cmd(0x0e); //DISPLAY ON, CURSOR BLINKING
delay(m_sec);
lcd_data_string(str1);
}
void set_hr1() // Function to set hour
{
hr1++;
if(hr1>11)
hr1=0;
lcd_cmd(0xc3);
lcd_data_int(hr1);
lcd_data(':');
}
void set_min1() // Function to set minute
{
min1++;
if(min1>59)
min1=0;
lcd_cmd(0xc6);
lcd_data_int(min1);
}
void main()
{
int k;
start=1;
dig_hr1=1;
dig_min1=1;
lcd_cmd(0x01);
lcd_cmd(0x83);
lcd("SET TIMING");
lcd_cmd(0xc3);
lcd_data_int(hr1);
lcd_data(':');
lcd_data_int(min1);
while(start==0)
{
delay(10);
if(dig_hr1==0)
set_hr1();
if(dig_min1==0)
set_min1();
}
if(am_pm==0)
{
lcd_cmd(0xc8);
lcd_data_string("am");
dig_am_pm=0;
}
if(am_pm==1)
{
lcd_cmd(0xc8);
lcd_data_string("pm");
dig_am_pm=1;
}
delay(200);
lcd_cmd(0x01);
while(1)
{
for(k=0;k<2;k++)
{
for(hr=hr1;hr<12;hr++)
{
for(min=min1;min<60;min++)
{
for(sec=0;sec<60;sec++)
{
lcd_cmd(0x82);
delay(1);
lcd_data_int(hr);
lcd_data(':');
lcd_data_int(min);
lcd_data(':');
lcd_data_int(sec);
if(dig_am_pm==0)
{
lcd("am");
}
else
{
lcd("pm");
}
lcd_data_string(" ");
delay(100);
}
}
min1=0;
}
if(dig_am_pm==0)
dig_am_pm=1;
else
dig_am_pm=0;
hr1=0;
}
}
}
Last edited by a moderator: