Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulation of complex design. Please advice

Status
Not open for further replies.

kumarghz

Member level 5
Joined
Nov 25, 2006
Messages
85
Helped
10
Reputation
20
Reaction score
7
Trophy points
1,288
Location
Penang, malaysia
Activity points
1,938
Hello,
I need advice on how to do final simulation of a complex design project. I'm doing a project which consist of various digital circuit blocks. For ease of design I have designed each module separately. However, to see the overall functionality of the project. I need to create a netlist which can link all these modules together and perform the simulation. Could you please advice on below items:
a) which SPICE features/command I can be used for this.
b) Do I need to name all port in each and every module uniquely? i.e: I have a port in a module called 'input1' and I also have same name on other module too. will these give problem?
c) Appreciate if you could attach to me a sample of any netlist.

For you information, I'm using Microwind & 5Spice tools for my design.

regards,
M.Kumar
kumar012 [at] gmail dot com
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top