Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulating feed network in HFSS

Status
Not open for further replies.
T

tylerhk86

Newbie level 3
Joined
Nov 9, 2009
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,300
I am setting up a model in HFSS which involves multiple antennas fed by a combination of hybrids and transmission lines. I have set up the feed network in Ansoft Designer and was able to get the return loss at the input port feeding the whole system, but how can I then simulate this circuit in HFSS in order to see how it effects the radiation pattern? Any ideas?

Thanks in advance!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top