mikemara
Junior Member level 1
Hello friends.
My name is Mike and I am electrical engineering student. I want to simulate an electric discharge circuit. I am using Simulink. I figured out that Mayr's model is the most accurate model for simulating electrical discharge (If you know something better please let me know). I found only a tiny bit of information about simulating electrical discharge. I am looking for a model that can give me good approximation about voltage spike due to this discharge. In general Mayr's model requires parameters that I don't really know how to get. I am really interested in modeling electrical discharge and its effects on the electrical grid.
Discharge circuit:Attached.
The discharge gap is around 0.4 mm.
C1,c2,c3- capacitors for required of charging and getting more Jowls.
Ra – resistor required to charge the capacitors (Limiting the current).
R1,R2,R3 – resistors for homogenous distribution of voltage
I really want to know what happens after the electrical discharge happens from voltage and current view point . I also want to build a spectral analysis to this electrical discharge.
My name is Mike and I am electrical engineering student. I want to simulate an electric discharge circuit. I am using Simulink. I figured out that Mayr's model is the most accurate model for simulating electrical discharge (If you know something better please let me know). I found only a tiny bit of information about simulating electrical discharge. I am looking for a model that can give me good approximation about voltage spike due to this discharge. In general Mayr's model requires parameters that I don't really know how to get. I am really interested in modeling electrical discharge and its effects on the electrical grid.
Discharge circuit:Attached.
The discharge gap is around 0.4 mm.
C1,c2,c3- capacitors for required of charging and getting more Jowls.
Ra – resistor required to charge the capacitors (Limiting the current).
R1,R2,R3 – resistors for homogenous distribution of voltage
I really want to know what happens after the electrical discharge happens from voltage and current view point . I also want to build a spectral analysis to this electrical discharge.