Pha5e
Advanced Member level 4
- Joined
- Dec 9, 2011
- Messages
- 101
- Helped
- 7
- Reputation
- 14
- Reaction score
- 6
- Trophy points
- 1,298
- Location
- I am not here - it's an illusion
- Activity points
- 1,928
Hi,
I'm fairly new to microcontroller design and have been asked to implement an LED delay for a display piece. It needs to sense when someone walks close and fade LEDs to maximum brightness and stay on for a period of time. I am thinking of using some form of motion sensor to trigger a microcontroller input pin.
I'm considering either using an ST Micro Nucleo board or a PIC Microchip part. Which is likely to be easier to implement the above? Any help is appreciated!
Thanks.
I'm fairly new to microcontroller design and have been asked to implement an LED delay for a display piece. It needs to sense when someone walks close and fade LEDs to maximum brightness and stay on for a period of time. I am thinking of using some form of motion sensor to trigger a microcontroller input pin.
I'm considering either using an ST Micro Nucleo board or a PIC Microchip part. Which is likely to be easier to implement the above? Any help is appreciated!
Thanks.