Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SIM900 over TCP to connect to Traccar open source

Status
Not open for further replies.
A

Alaa Auf

Newbie level 2
Newbie level 2
Joined
Jun 13, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
13
i am using Traccar open source

the following AT commands are Valid to connect over TCP but i don't find any response at traccar server????
AT
ok
AT+CPIN?
ok

AT+CGACT?

+CGACT: 1,0
+CGACT: 2,0
+CGACT: 3,0

AT+CIPSTATUS

STATE:IP INITIAL

AT+CIPMUX=0
OK

AT+CSTT="INTERNET.VODAFONE.COM","INTERNET","INTERNET"
OK
AT+CIICR
OK
AT+CIFSR
10.211.102.86

AT+CIPSTART="TCP","41.65.222.217","8082"
ok
connect ok
AT+CIPSEND
>$PGID,8602118023529867*0F
SEND OK
AT+CIPSEND
>$GPRMC,120500.000,A,6000.0000,N,13000.0000,E,0.00,0.00,010112,,*33
SEND OK
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top