Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

sim900 CSPN problem get provider <<fail>>

Status
Not open for further replies.

micman

Member level 1
Member level 1
Joined
Mar 27, 2002
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
utenti.tripod.it
Activity points
207
I have a strange problem of sim900. When sending this command "AT+CSPN"
I receive this response:

+CSPN: "", 3


strange because, the SIM900 is attached to the network and sends text messages and calls correctly !
Why?

I have this version; "Revision: 1137B02SIM900M64_ST_ENHANCE"

I inizialize the sim900 in this mode:
ATZ
->ok

AT+CMGF=1
->ok

AT+CSMS=0
->+CSMS: 1,1,1

AT+CSMP=49,167,0,0
->Ok

AT+CNMI=1,2,0,0,0
->Ok

AT+CLIP=1
->Ok

AT+CREG?
->+CREG: 0,1

AT+CSPN
->+CSPN: "", 3


Why, should answer "vodafone" ! 8-O
 
Last edited by a moderator:

Hello, you tried use with other SIM card from other communication operator?
May be is just a error in the service tower vodafone you are using.
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top