Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sim300 INTERFACING WITH ARM

Status
Not open for further replies.
A.Rashad

A.Rashad

Member level 4
Joined
Jul 27, 2011
Messages
69
Helped
6
Reputation
10
Reaction score
5
Trophy points
1,288
Location
Pune
Activity points
1,792
I need to interface sim300 to ARM lpc2148, sIM300 gsm MODEM is working fine on hyperterminal , but as soon as I connect Tx RX of lpc2148 to Tx Rx of Modem , Its not working, means simultaneously I have connected RS232 cable to GSM modem, I am not able to see any response or command from ARM to Modem on Hyperterminal..
 

U have to connect a RS232 RX to LPC TX, And RX232 TX to LPC RX
Bettre try it like this.....
LAst time i also made this king=d of mistakes.

- - - Updated - - -

U have to connect a RS232 RX to LPC TX, And RX232 TX to LPC RX
Bettre try it like this.....
LAst time i also made this kind of mistakes.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top