Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SIM application toolkit access problem for WAVECOM CDMA module!!!

Status
Not open for further replies.
M

mahmudur.rahman

Newbie level 4
Joined
Nov 3, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,328
hi everyone,
i have a WAVECOM CDMA module. i am trying to access the Sim Application toolkit.
i did manege to get the main menu using AT+SMGI=0\r command after getting the +STIN = 0 from the module. then i get 4 items in the menu the are given bellow...
+STGI: “e top-up”
+STGI: 1,4,”Prepaid”,0
+STGI: 2,4,”Billpay”,0
+STGI: 3,4,”OptionR”,0
+STGI: 4,4,”My Wallet”,0

now i should get something like +STIN = 6 (according to wavecom at command example) when i use AT+STGR = 0,1,1\r

but pblm is i am getting just an OK.

so my question is,
am i doing something wrong?
is there any other way to access sim application tool kit for CDMA?

by the way, the sim is ok coz i can access it from my cell.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top