Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Selecting microcontroller with two UART

Status
Not open for further replies.

sanket.joshi

Member level 3
Member level 3
Joined
Jun 27, 2013
Messages
65
Helped
8
Reputation
16
Reaction score
8
Trophy points
8
Location
Mumbai,India
Visit site
Activity points
386
i want to interface GSM module and RF-ID card reader with microcontroller.
So i want microcontroller with two UART..
can anyone suggest me such uc possibly of Atmega series with less cost?
thanks
 

Is development board of these uc available?

Possibly, although you could build your own or use a breadboard to prototype your design.


and ATMEGA162 will be suitable for my system no??

I honestly cannot answer that question without knowing more about your application/design.

The search page for which I have provided a link, can be changed to match your requirements.

There are 25 ATmega series devices currently offered by Atmel which have two or more UARTs.

You may want to select a device with has more than the required Flash/RAM and is available in a development board.

BigDog
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top