Dec 7, 2010 #1 P pmeg 88 Newbie level 1 Joined Dec 7, 2010 Messages 1 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,287 Hi Friends I m doing a project with PIC18F452.and um not good at Micro C. i need to write the pressure sensor readings to a SD MMC. plzz help with the coding. pressure sensor is interfaced to the 3 rd pin and it gives output between 0v t0 4v.MMC is interfaced as the micro c libry shows. i tried the sample coding also.but nothing saved in SD MMC. please help me with this. thank you.
Hi Friends I m doing a project with PIC18F452.and um not good at Micro C. i need to write the pressure sensor readings to a SD MMC. plzz help with the coding. pressure sensor is interfaced to the 3 rd pin and it gives output between 0v t0 4v.MMC is interfaced as the micro c libry shows. i tried the sample coding also.but nothing saved in SD MMC. please help me with this. thank you.
Dec 7, 2010 #2 L luben111 Advanced Member level 1 Joined Mar 2, 2002 Messages 489 Helped 111 Reputation 223 Reaction score 107 Trophy points 1,323 Location UK Activity points 3,924 Hi, If you move on Atmel processor there is ready working project for what you want - here ELM - FatFs Generic File System Module Actually you can modify it for PIC processor because all sources are available.
Hi, If you move on Atmel processor there is ready working project for what you want - here ELM - FatFs Generic File System Module Actually you can modify it for PIC processor because all sources are available.