RAKESH E.R
Member level 2
Hi all,
In my design there are three clocks, Two the clocks in the design are defined at the ports(create_clock get_ports) but the last one clock is defined at the pin(create_clock get_pins). How can i define this clock as Scanclock for the dft signal declaration(set_dft_signal -type scan enable). Please help me
Thanks In Advance
Rakesh
In my design there are three clocks, Two the clocks in the design are defined at the ports(create_clock get_ports) but the last one clock is defined at the pin(create_clock get_pins). How can i define this clock as Scanclock for the dft signal declaration(set_dft_signal -type scan enable). Please help me
Thanks In Advance
Rakesh