Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Scan insertion in DFT compiler

Status
Not open for further replies.

RAKESH E.R

Member level 2
Joined
Dec 31, 2010
Messages
51
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
INDIA
Activity points
1,630
Hi all,
In my design there are three clocks, Two the clocks in the design are defined at the ports(create_clock get_ports) but the last one clock is defined at the pin(create_clock get_pins). How can i define this clock as Scanclock for the dft signal declaration(set_dft_signal -type scan enable). Please help me

Thanks In Advance
Rakesh
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top