hi:
In my board, I use a max3232 for uart.In the board ,it also have ams1117-1.8 and ams1117-3.3 , lpc2114,and LCD.The power supply is 5V.But the max3232 do not work.And I use another power for max3232,it works well.
I feel max3232 is a lower power chip ,why it down!
thanks for answers!
The max 3232 is multi voltage... 3-6v https://focus.ti.com/lit/ds/symlink/max3232.pdf
I would suggest using the same supply as the micro you are trying to interface, also look at page 7 of the datasheet for cap values for the right voltage.