Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RF PCB board simulation

Status
Not open for further replies.
P

pavel47

Member level 4
Member level 4
Joined
Nov 8, 2005
Messages
68
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Switzerland
Activity points
1,790
Hello,

Did someone experience with simulation of RF PCBs (e.g. GPS).
The signal propagation chain looks like this:
Antenna GPS --> [matching NW] --> LNA [matching NW] --> SW filter [matching NW] --> GPS module (e.g. from u-blox)
All modules in such chain (except matching networks and antenna) have either Spice models either S-parameters.
Matching networks are RLC chains.
Antenna is 3D object.

What EM tool matches best such kind of tasks:

  • ANSYS Electromagnetics
  • EMpro (from Agilent)
  • CST Studio
  • Sonnet suite
  • FEKO
  • etc

Thanks in advance

Regards

Pavel
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top