Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RF IC design company!!

Status
Not open for further replies.

MK28

Full Member level 2
Joined
Mar 7, 2005
Messages
122
Helped
10
Reputation
20
Reaction score
7
Trophy points
1,298
Activity points
2,154
anyone knows any RF IC design companies in Switzerland?
 

VSMVDD

Banned
Joined
Jun 12, 2005
Messages
646
Helped
92
Reputation
184
Reaction score
34
Trophy points
1,308
Location
scotland uk
Activity points
0
didnt think the swiss were any good other than clocks and banking natzi gold

you could try somerkamp {bought over by yeasu in the 80's}

but i beleve manufactured radios and rf stuff {very nice also}

but no chips.....

chips come from four main areas of the world
usualy near to desposits of white sand,,,,

like

usa malaysia tiawan korea smaller but bigger is japan scotland etc...

many other sand beaches,,,,

you see sand isnt just sand

it comes from crushed deposits

and a natural ongoing refining proccess

wafers for chips these days
are usualy refined in space {orbital space station}

to enshure superiour refinement and removal of contaminants
like other elements

lots of effort is put into this
to enshure good clean wafers for masking etching processes

done using strong magnetics and heat but in space there is no eddies {currents in hot things}

so magnetic processes work far better to remove junk and finer chips can be made from finer crystal formation done in the space enviroment
 

mogiz

Junior Member level 1
Joined
Jan 31, 2006
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,422
thank you
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top