Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RF 13.56MHz Amplifier

Status
Not open for further replies.

LorenzoFR

Newbie level 1
Joined
Dec 12, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
hey!

I need a amplifier only for a test application. I want to change an inductor of 4.92uH and a antenna of 4.5mm diameters with one smaller, but to know the best orientation of the antenna i have to do some mesures with a scope. the signal is very low, somebody known the right amplifier for my problem?
 

13.56 MHz is more like DC than RF related to today's electronic device parameters. But a 50 ohm wideband amplifier can serve the purpose, of course. You didn't however tell about intended level, bandwidth, etc.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top