Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

REQ: LCD Routines for PICC18 C Compiler

Status
Not open for further replies.

The Puma

Full Member level 2
Joined
Apr 4, 2002
Messages
134
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
899
I must be connected as follows

LCD PIC
E RB1
RS RB2
RW RB3
D4 RB4
D5 RB5
D6 RB6
D7 RB7

How can i change the sample LCD.C and LCD.H files to work?
 

The Puma

Full Member level 2
Joined
Apr 4, 2002
Messages
134
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
899
I use the standard LCD.C and H files as by HITECH supplied in the sample directory

The connectons are as follows

LCD pin - E to PIC pin - RB1
LCD pin - RS to PIC pin - RB2
LCD pin - RW to PIC pin - RB3
LCD pin - D4 to PIC pin - RB4
LCD pin - D5 to PIC pin - RB5
LCD pin - D6 to PIC pin - RB6
LCD pin - D7 to PIC pin - RB7
 

The Puma

Full Member level 2
Joined
Apr 4, 2002
Messages
134
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
899
Please can you post a working version with the above params

It you would do, your did a great job for me
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top