Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reference current source circuit?

Status
Not open for further replies.

hardings

Member level 3
Joined
May 23, 2003
Messages
57
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Activity points
501
Hi,

We know we have bandgap for accurate reference voltage, but is it possible to implement some kind of circuit as reference current? Of cource do not use reference voltage over resistor simply which is resistor value dependant.
 

Have read of a reference for current in a research paper in ieee.
but if they are implemented on products I hve not seen
 

I think it's hard to implement reference current in intergrated circuit because the resister.
In razavi's book he instead resister with switched capacitor. I think you could try it ,but the clock and speed maybe some difficuit.
 

Hi,

See

A new low voltage precision CMOS current reference with no external components

in



as an example
 

    hardings

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top