Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Realized gain and directivity

Status
Not open for further replies.

xanadu25

Newbie level 5
Joined
Aug 6, 2008
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
directivity gain

The simulation results in HFSS shows 4-6 dBi directive gain and -12 to -25 dB Realized gain for the whole band of a dual fed antenna.
Will it work? or how to increase the Realized gain?
 

Azulykit

Advanced Member level 4
Joined
Feb 18, 2007
Messages
1,121
Helped
219
Reputation
436
Reaction score
112
Trophy points
1,343
Location
All over the Map.
Activity points
8,407
Will it work? Maybe. It depends on a wide range of factors beyond the gain. Look into "Link Calculations" to see what you need to evaluate your situation.

How does one increase the gain? One place to look it to make the antenna more efficient by replacing elements with more efficient versions (lower loss tangents and increased conductivity). You might also address the impedance matching.

Added after 52 seconds:



Will it work? Maybe. It depends on a wide range of factors beyond the gain. Look into "Link Calculations" to see what you need to evaluate your situation.

How does one increase the gain? One place to look it to make the antenna more efficient by replacing elements with more efficient versions (lower loss tangents and increased conductivity). You might also address the impedance matching.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top