Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Reading the RN16 of a tag under the EPC UHF Class1 Gen2 Protocol

Status
Not open for further replies.

B.Lo.

Newbie level 1
Joined
Apr 26, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Sophia Antipolis
Activity points
1,288
Hello Everybody,

I am currently trying to write a program able to manage a communication from a reader point of vue to communicate with a unique tag using laboratory instruments : modulator, HF signal generator, spectrum analyser and oscilloscope.
Obviously, the process follows EPC requirements, but I am facing a little difficulty : after the Select commands, the reader has to know the 16-bit random number generated by the tag as an identifier and to backscatter it.

Does someone know if a 'debug' mode allows us to know the value in advance, or to send the value we want to the tag ? It would be helpful .

Thanks in advance.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top