amrendra2k1
Newbie level 3
I have gone for prescan of our board to an semi anehoic chamber and we found that radiation mentioned by me above is due to a RGMII_TX/RX_CLK line which is 11inch long trace. RGMII_Clk line trace is made(11inch) intentionally to add delay of of 1.5/2ns which is required between data and clock line as per RGMII specification.
These lines are also going through a board to board connector.How we can reduce the radiation due to RGMII_TX_RX clock line?
These lines are also going through a board to board connector.How we can reduce the radiation due to RGMII_TX_RX clock line?