worst
Newbie level 6
- Joined
- Mar 8, 2005
- Messages
- 11
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Shanghai,China
- Activity points
- 1,400
cds_netlisting_mode
I have some questions about using IC5.0.0.
When I run a trans simulation in AE(the circuit include a pluse voltage supplier),I
get a error message:"Error found by spectre during hierarchy flattening. V1: Waveform type must be specified if any waveform paras are given."
Somebody tell me this is because I set the CDS_Netlisting_Mode wrong.But I have set ".bashrc" as the article "Cadence IC Linux Installation Tutorial v0.1 - 01.05.2005 ".
The following is my ".bashrc":
CDSDIR=/IC5
CDS_ROOT=/IC5
CDS_INST_DIR=/IC5
CDS_INSTALL_DIR=/IC5/tools/dfII
export PATH =$CDSDIR $CDS_ROOT/tools/bin $CDS_ROOT/tools/spectre/bin:$PATH
export PATH= ( $path $CDS_INSTALL_DIR/bin )
export CDS_Netlisting_Mode "Analog"
export CDS_Netlisting_Node "Analog"
export CDS_LIC_FILE=/usr/local/flexlm/license.dat
I couldn't sure which is right "CDS_Netlisting_Mode" or "CDS_Netlisting_Node", so I write them two.
Anybody can help me check the ".bashrc" file and tell me why the problem will be
exist?
Thank you very much!
I have some questions about using IC5.0.0.
When I run a trans simulation in AE(the circuit include a pluse voltage supplier),I
get a error message:"Error found by spectre during hierarchy flattening. V1: Waveform type must be specified if any waveform paras are given."
Somebody tell me this is because I set the CDS_Netlisting_Mode wrong.But I have set ".bashrc" as the article "Cadence IC Linux Installation Tutorial v0.1 - 01.05.2005 ".
The following is my ".bashrc":
CDSDIR=/IC5
CDS_ROOT=/IC5
CDS_INST_DIR=/IC5
CDS_INSTALL_DIR=/IC5/tools/dfII
export PATH =$CDSDIR $CDS_ROOT/tools/bin $CDS_ROOT/tools/spectre/bin:$PATH
export PATH= ( $path $CDS_INSTALL_DIR/bin )
export CDS_Netlisting_Mode "Analog"
export CDS_Netlisting_Node "Analog"
export CDS_LIC_FILE=/usr/local/flexlm/license.dat
I couldn't sure which is right "CDS_Netlisting_Mode" or "CDS_Netlisting_Node", so I write them two.
Anybody can help me check the ".bashrc" file and tell me why the problem will be
exist?
Thank you very much!