Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Questions about bandgap circuit design.

Status
Not open for further replies.
H

holddreams

Full Member level 6
Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Visit site
Activity points
4,237
The process provides the following corners:
tt_corner: mos_tt,resistor_tt,bjt_tt
ff_corner: mos_ff,resistor_ff,bjt_ff
ss_corner: mos_ss,resistor_ss,bjt_ss

The bandgap output voltage changed a lot when using different bjt corners.
However,the output voltage changed a little if bjt corner remains stable and only change the mos and resistor corner.

How should i do?

Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top