Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Question] physical Transmission media a used in wired/wireless Lan and the internet

Status
Not open for further replies.

eng_boody

Member level 3
Joined
Nov 27, 2011
Messages
57
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,754
Hi All ,
I hope u are fine ,

my question is about Lan's and internet 's Topology and corresponding transmission media and multiple access resolution protocols,

First part : for each of mesh,star,bus,ring topology which one is used for lan and internet practically whether recently or obsolete.

Second Part : for each used topology what's the appropriate or corresponding transmission media (cable) Coaxial, Twisted pair, Fiber Optics Or Wireless EM waves

Third part : for each topology and transmission media valid pair which Multiple Access resolution (sub layer) protocol is used and what's it's Specification Document number and to which organization it belong .

:smile::smile::smile::smile::smile:Thanks in advance :smile::smile::smile::smile::smile:​
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top