Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question:how to expand frecuente range of a Digital Scope

Status
Not open for further replies.

nebisman

Full Member level 4
Joined
Apr 13, 2002
Messages
226
Helped
10
Reputation
22
Reaction score
9
Trophy points
1,298
Activity points
1,849
I have a 20MhZ digital scope with pc interface. Iwant info about how to expand it frecuency range by software. I know that for repetitive sampling for static signals this is posible by subsampling.

Any info very appreciated

thanks
nebisman
 

flatulent

Advanced Member level 5
Joined
Jul 19, 2002
Messages
4,629
Helped
489
Reputation
980
Reaction score
150
Trophy points
1,343
Location
Middle Earth
Activity points
46,689
analog chanel limits

It is very likely that the analog amplifiers before the ADC will limit your bandwidth. You can try making a sampling circuit before the scope. This will alias down the signal to be within the amplifier bandwidth. Many years ago Tektronix made such a box for their analog scopes.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top