Re: Network Cable
Hooda said:
hi
i made a home network .for making RJ 's the network cables
1)does it differs in the colors of the 8 wires in the Network cable to connect between the 2 RJ of the terminals ..?
2)for example , orange is wire no.1 should be no.1 in the second terminal of the Cable?
thanks in advance
Hooda:
Exists two EIA/TIA specifications, EIA/TIA 568-A and EIA/TIA 568-B. If are going to connect only two PC without a Hub or Switch, you have to make a Crossover cable.
You can make the cable following by this diagram:
PIN---- RJ-45 (1)-----------RJ-45 (2)
-1------White/Orange------White/Green
-2------Orange--------------Green
-3------White/Green--------White/Orange
-4------Blue------------------Blue
-5------White/Blue----------White/Blue
-6------Green----------------Orange
-7------White/Brown--------White/Brown
-8------Brown----------------Brown
Best R.
Guille
Added after 17 minutes:
Hooda:
I found two documents in my PC, one is useful to know what kind of cable you need for each app. And the other is an image, on it, you have the front seen of female RJ connectors and specs.
Best R. again.
Guille