Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

question about Nokia 5510 lcd

Status
Not open for further replies.

aliyesami

Full Member level 6
Full Member level 6
Joined
Jan 7, 2010
Messages
369
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
USA
Visit site
Activity points
4,190
This LCD datasheet is saying it uses "Serial communcation" and i have two questions :

-doesnt serial communication means setting baud rate and stop bits ? data sheet is not mentioning any of these .

- The Avr processors have three kinds of serial pins .. "TX/RX" , "MOSI/MISO" and "I2C" , to which one should i be connecting this lcd to?

Thanks
 

This LCD, as I know, works in SPI. So you will be using MOSI/MISO. There must be another pin, CLK. That's the clock. You have to first know what LCD controller it has, example PCD8544 from Philips. Download its datasheet. It has everything you need.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top