When I use the post-processing visualizaton to check the current ditribution of a spiral inductor. The figure only show several discreted highlight triangles along the trace. But for another spiral inductor which is litter bigger it can clearly show the coutinuous highlight currents crowding at the inner side of the spiral.
Is there any possibility for the post processing failed to showed the exact currents?Beacause the S parameter results seems has no problems. Thank you.
In fact, the current arrows show the same results, the current is very little at most of the area of the spiral (small blue arrows) and some discrete strong currents ( Big red arrows) were found at several points along the spiral. It is very weird.
In fact, the current arrows show the same results, the current is very little at most of the area of the spiral (small blue arrows) and some discrete strong currents ( Big red arrows) were found at several points along the spiral. It is very weird.
Hi
I have tried to disable mesh reduction and get a much more dense mesh, and this time the currents' show is more reasonable.
Heejing, your method is good,and make the currents more clear.
Thank you, my friends.