Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about combline cavity diplexer design

Status
Not open for further replies.
R

rf100

Member level 1
Joined
Mar 13, 2004
Messages
37
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Activity points
264
Combline Diplexer

Hi
I am designing a combline cavity diplexer and I wonder if there is a way to align "tune" the resonators, and can I use power combiner at the output to see the response for the two filter at the same time

I apriciate any help

Cheers
 

Re: Combline Diplexer

Sure. If you used a 10 dB pad between the two outputs and the combiner inputs, you would get a pretty accurate picture. But it will not help you tune, as you will not know which of the two filters to adjust looking at the composit graph.
 

Re: Combline Diplexer

Still need some information about how to claibrat the diplexer
any body with some experience of tuning Mux or Dip can help
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top