questin in fully op amp ?

Status
Not open for further replies.
W

wael_wael

Full Member level 4
Joined
Dec 3, 2005
Messages
221
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,298
Activity points
2,760
hi every body

i have 2 stages fully differential op amp, i want increase the current in second stage. in fact when i increase the current in the bias circuit the current in first stage increase but in second stage not increase much . so could some one help me and give me any idea to increase the current in second stage
thanx
 

Hi,

just few thoughts up in my head.

1) test each stage separately. say, only work on your 2nd stage and see if increasing the current in your bias ckt changes anything in your main ckt.

2) i think it's a little hard to help you w/o your schematic. can you upload ur schematic?


cheers
 

    W

    wael_wael

    Points: 2
    Helpful Answer Positive Rating
separate bias
 

Check the second stage's input bias point.
 

    W

    wael_wael

    Points: 2
    Helpful Answer Positive Rating
If you use current mirror, then change the W/L of the current mirror in the sencond stage. The current bias circuit should not change. I think.

Ryan
 

    W

    wael_wael

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…