Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Ques] Sigma Delta Fractional-N Synthesizer in ADS

Status
Not open for further replies.

haadi20

Full Member level 1
Joined
Feb 22, 2005
Messages
99
Helped
15
Reputation
30
Reaction score
4
Trophy points
1,288
Activity points
2,172
fractional-n sigma-delta synthesizer

Has anybody tried system level simulation in ADS for Sigma-Delta Fractional-N Frequency Synthesizer?

Please do not send any theoretical papers or links as i have gone through many.

What i am looking for is an example in ADS...which simulates the sigma-delta Fractional N Frequency synthesizer at system level using the blocks available such as Charge-Pump PFD, VCO, Divider etc...

I have observed that there is no ready-made block for sigma delta as such so one has to build it...so an example for it will be very useful for me..
Thanks and Regards
 

hi ,

i used simulink for system level simulation .fractional n frequency synthesizer is readily available in communication blockset

u can get better models in mathworks main wedsite.
 

attached is a "DELTA SIGMA Fractional-N Synthesizer" design Project created by @DS 2005A Design Guide. hope can help you....:D
 

    haadi20

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top