franticEB
Full Member level 3
Hi,
i'm designing an pwm inverter with this feature:
Fsw=25-50Khz
Fout=60Hz
Vbus=250V
Pout=150W max
In figure below the schematic and the components i want to use.
First of all i want your opinion/advices on my circuit (bypass capacitor of ICs are not in figure but there are in the real scheamatic).
Second i want to write pcb design rules for that circuit.
Could you help me in this task?
Could you suggest me any tutorial/application notes on this subject?
I'm not expert about pcb issues in power inverter.
Thanks in advance.
i'm designing an pwm inverter with this feature:
Fsw=25-50Khz
Fout=60Hz
Vbus=250V
Pout=150W max
In figure below the schematic and the components i want to use.
First of all i want your opinion/advices on my circuit (bypass capacitor of ICs are not in figure but there are in the real scheamatic).
Second i want to write pcb design rules for that circuit.
Could you help me in this task?
Could you suggest me any tutorial/application notes on this subject?
I'm not expert about pcb issues in power inverter.
Thanks in advance.