Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Pure Sine Wave SPWM Inverter 12vDC/220vAC 50 Hz- Help

Status
Not open for further replies.

mohamedameen

Newbie level 5
Newbie level 5
Joined
Jun 26, 2014
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
6 October City, Egypt
Visit site
Activity points
62
Hi all,

I need a working schematic design for a pure sine wave inverter using microcontroller or anything else.
Input voltage: 12v DC.
Output voltage: 220v AC.
Frequency: 50 Hz.
Power: 200 watt or larger.


Thanks in advance :razz:
 

I need a working schematic design for a pure sine wave inverter using microcontroller or anything else.
Input voltage: 12v DC.
Output voltage: 220v AC.
Frequency: 50 Hz.
Power: 200 watt or larger.


Hi mohamedameen

I suggest that you have a search whole forum before you ask ! there are a lot of related threads to your problem .

Best Luck
Goldsmith
 

Pure sine wave inverter problem

Hi all,

I'm working on a pure sine wave inverter using PIC16F877A, I used these topic as guidelines:
1. Sine Wave Generation with PIC16F877A: https://goo.gl/pJjTFG
2. Using the high-low side driver IR2110: https://goo.gl/6uMoV4

I have two problems:
1. When I give the circuit a 12v DC inputm it only gives me a 3v AC output!
2. I can't figure out how to design a suitable LC filter, I used a TCL-LC filter with two 30mH coils and a 150uF capacitor and it produces a 50Hz pure sine wave, but the amplitude of the signal isn't stable.

Could anyone help me?
 

Re: Pure sine wave inverter problem

Hi all,

I'm working on a pure sine wave inverter using PIC16F877A, I used these topic as guidelines:
1. Sine Wave Generation with PIC16F877A: https://goo.gl/pJjTFG
2. Using the high-low side driver IR2110: https://goo.gl/6uMoV4

I have two problems:
1. When I give the circuit a 12v DC inputm it only gives me a 3v AC output!
2. I can't figure out how to design a suitable LC filter, I used a TCL-LC filter with two 30mH coils and a 150uF capacitor and it produces a 50Hz pure sine wave, but the amplitude of the signal isn't stable.

Could anyone help me?

can't referer to Tahmid Blogs?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top