af19
Newbie level 4
Hello guys.
I have a very strange problem in PSpice.
I was going to use a transformer in PSpice, and I created a simple circuit to test the transformer.
Output voltage of the transformer was correct but when I measured current of the source, it was about 50 KA peak to peak!!
The circuit is so simple, there is only a VSIN, a transfromer and a 1K Resistor in the output as a load.
I tried everything I knew. I used XFRM_LINEAR as the transformer, I used K_LINEAR and two inductors but nothing solved my problem.
I am struggling with this issue about 5 days.
I am using Cadence OrCAD 17.2.
Does anyone have a suggestion?
This problem is making me crazy:|:|
Here is the Circuit and the Current waveform.
I have a very strange problem in PSpice.
I was going to use a transformer in PSpice, and I created a simple circuit to test the transformer.
Output voltage of the transformer was correct but when I measured current of the source, it was about 50 KA peak to peak!!
The circuit is so simple, there is only a VSIN, a transfromer and a 1K Resistor in the output as a load.
I tried everything I knew. I used XFRM_LINEAR as the transformer, I used K_LINEAR and two inductors but nothing solved my problem.
I am struggling with this issue about 5 days.
I am using Cadence OrCAD 17.2.
Does anyone have a suggestion?
This problem is making me crazy:|:|
Here is the Circuit and the Current waveform.