Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Proteus .LYT to Gerber

Status
Not open for further replies.
J

Jim2214

Newbie level 2
Newbie level 2
Joined
Sep 12, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
24
Hi,
I have a .LYT file and woud like to produce a couple boards. Since I don't use proteus I was hoping maybe someone here who does would convert the .LYT file to Gerbers and Drill files.
Thanks
 

Attachments

  • project.zip
    46.9 KB · Views: 68

I hope that this is what you want.
 

Attachments

  • project - CADCAM Bottom Copper.TXT
    55.7 KB · Views: 65
  • project - CADCAM Bottom Solder Resist.TXT
    20.1 KB · Views: 58
  • project - CADCAM Drill.TXT
    17.8 KB · Views: 63
  • project - CADCAM Mechanical 1.TXT
    190 bytes · Views: 69
  • project - CADCAM READ-ME.TXT
    4.2 KB · Views: 65
  • project - CADCAM Top Copper.TXT
    65 KB · Views: 59
  • project - CADCAM Top Silk Screen.TXT
    167.2 KB · Views: 56
  • project - CADCAM Top SMT Paste Mask.TXT
    5.5 KB · Views: 50
  • project - CADCAM Top Solder Resist.TXT
    25.6 KB · Views: 47

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top