does any one knows how to program 3 devices in the same board, using 3 diferents program files? i´m using quartus II and two 3032 and one 3064. Thanks!!!
you can hook them up in tothe JTAG chain, and then program. Not sure why you have thre devices not just one something like MAX II EPM 240....
Good lack
Hi
i am not aware how to do in quartus tool. but in xilin you can do it with impact tool from xilinx. initialise the jtag chain and then you can configure diff devices with diff progaming file. does ur card have some smart media or any other programing method like serial or usb. that might also help.
hi,
Quartus has tools "PROGRAMMER" for programming same as "IMPACT" in ISE.
Use auto detect mode for getting chain,then program device by alternatelly .bsdl files for bypassed device & programming file for othes.