Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with using CAM350 for converting files

Status
Not open for further replies.

totue

Junior Member level 3
Joined
Sep 18, 2001
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
147
CAM350 Problem

Hi,

i use CAM350 to convert a RS274X file to a RS274D file, all is ok except all pieces of copper inside copper plan and isolated from this plan not appear in the converted file, there are filled.

During the conversion CAM350 print this message : "WARNING: Raster polygons are output to a vector plotter, voids in any polygon are output as dark polygon."

Do you have any idea?

Totue
 

AG

Member level 1
Joined
May 17, 2001
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
160
The 274x support raster polygon 274d no.
Convert raster in vector fill.

Bye
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top