Re: Tube amp hum problem
Hi Ram,
Haha..No not Death..but you're right..it's metal-style with a lot of heavy bounce rythms, special/weird bridges a.s.o...(can hardly wait to get the amp in the rehearsal!)
I actually can't remember..the effects are in the rehearsal room by now, and I'll bring them home tomorrow to check..I also seem to remember that some of them are poping when switched in and out. I think the whole chain needs a review..with the spurious DC in mind..
Thanks
Thomas
Added after 23 minutes:
btw...one thing I've notice, Frank/Ram.
Don't know exactly how to explain this, but if I step, tap or roll my foot on/over the cable (touching the 6 meter long cable) that goes from the guitar and to the first effect pedal, I can hear the scratching noise in the speakers. I don't know if this is just because of a poor shielded/quality cable....or if it also could hae something to do with spurious DC..
Frank, it's the same sound as when I turn the inserted volume pot at the little MOSFET-preamp..
Thanks
Thomas
Added after 6 minutes:
Just to make sure I've got it right Frank,
If I connect the guitar directly to the A/B-box and then directly to the amps..without connecting the 9 DC supply..then the pops should go away, right?