Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem with Simulation UWB antenna with CST

Status
Not open for further replies.
L

Leilon

Member level 5
Joined
Jan 19, 2008
Messages
89
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,288
Activity points
1,791
Hi everybody,
I have simulated a UWB antenna with CST, but my result in wrong. I'm new in CST, plz help me.
I have attached the CST file.

Thanks
 

hye.. I also working with UWB antenna wth CST.. one tips to obtain UWB antenna.. use transmission line to feed a pach antenna and use edge feed. and use half ground plane.. I am using FR4 board for my design. to obtain the UWB frequency (3.1 GHz to 10.6 GHz) you can play around with ground plane and patch size.. tQ
 

Hey bro are u using any other software other than CST?
 

Dear derek638, I used HFSS also, but it's result is different form article and is the similar to CST
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top