Problem with simulation results of coil design in HFSS

fussylogia · Jan 25, 2005

I have designed a birdcage coil in HFSS and trying to simulate it.However i can never see expected result.I cannot be sure about the connections and boundary canditions.I have some questions.
1_) Can i assign capacitance or inductance to 2D geometry.
2_)Some of my parts are detached, how can i be sure of their conductances.Is the material that they are detached from important?
3) How can i connect 2D component to 3D component
4_)I have designed a coax(inner pec outer teflon) Is it true or do I need add something extra.

nubbl123 · Nov 21, 2009

Re: Coil design in HFSS

fussylogia said:
I have designed a birdcage coil in HFSS and trying to simulate it.However i can never see expected result.I cannot be sure about the connections and boundary canditions.I have some questions.
1_) Can i assign capacitance or inductance to 2D geometry.
2_)Some of my parts are detached, how can i be sure of their conductances.Is the material that they are detached from important?
3) How can i connect 2D component to 3D component
4_)I have designed a coax(inner pec outer teflon) Is it true or do I need add something extra.

Hello,

I have the same problems since I am sitting here and designing a birdcage coil. My problem is that this project needs to be finished next week, and I am very stressed out because the simulation won't work, so if you solved your simulation problems could you please be so kind to send me your project?

You would help me a lot.

my email:
norbert.bauer@gmx-topmail.de

greetz,

Problem with simulation results of coil design in HFSS

fussylogia

Newbie level 5

nubbl123

Newbie level 1

Similar threads

Problem with simulation results of coil design in HFSS

fussylogia

Newbie level 5

nubbl123

Newbie level 1

Similar threads

Privacy & Transparency

Privacy & Transparency