Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with pipeline ADC harmonics

Status
Not open for further replies.

zouyufeng

Member level 1
Joined
Apr 5, 2005
Messages
37
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,498


If design is perfect , whether even harmonic is contracted in spectrum figure of the pipepine ADC with diferential S/H circuit?


Appendix is my spectrum figure of pipeline ADC.

Besides fin=0.1MHz, spectrum,In 0.2,0.3,0.4,0.5.......2MHz, is quantization error or harmonics?

please help me!!!thank you!!!

[/code]
 

About pipelian ADC!

if it is a simulation result, maybe your step is too large
 

Re: About pipelian ADC!

what is'step is large'? fin=0.1M, fs=4M,this is not large! Can you clearly!

Thank you!
 

Re: About pipelian ADC!

this result obtained by matlab! no relation with step!!!?/?
 

Re: About pipelian ADC!

I think Fin and Fsample shoudl satisfy:
fIN / fSAMPLE = NWINDOW / NRECORD,
fIN: Periodic input signal
fSAMPLE: Sampling/clock frequency of the ADC under test
NWINDOW: Integer number of cycles1 within the sampling window, prime number
NRECORD: Number of data points in the sampling window or FFT
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top