Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem with NICs -need help

Status
Not open for further replies.

electronicman1

Newbie level 6
Joined
May 17, 2015
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
85
dear friends;

I have two computers (Manager and CCSDS) instaled in earth station connected with an intergrate NIC to 3COM NIC.

sometimes I got error numbers: -4 and -5; I tryed to ping but its not working,
after restart the CCSDS computer ,Ping working.

I didnt know how to solve the problem;
I need your help;


cordialy
 

disconnection at the wired network can be related to 3 reasons:
1-cable failure (maybe you have lose connection).
2- bad hardware
3- incorrect driver
Over the time, heating and cooling components will cause the loosening of their joints and the failure will appear.
please check your connection first and next install proper driver for each NIC. and finally check your hardware.
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top