Nojman
Newbie level 6
Hi!
I'm having some problems with my MPLAB 8.60. I'm trying to program a PIC16F628 with a PICKIT 3 with the programlanguage B Knudsen Data CC5X.
I'm just trying a simple code to put a LED light on, the code is:
And when I try to build it I get this error message.
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\Program Files (x86)\Microchip\MPASM Suite\mplink.exe" /o "lysdiod3.HEX"
MPLINK 4.37, Linker
Copyright (c) 1998-2010 Microchip Technology Inc.
Error - linker command file required.
Errors : 1
Link step failed.
BUILD FAILED: Tue Jan 14 12:22:38 2014
Tryed to google it but with no luck.. So can someone help me with this problem?
Thanks!
I'm having some problems with my MPLAB 8.60. I'm trying to program a PIC16F628 with a PICKIT 3 with the programlanguage B Knudsen Data CC5X.
I'm just trying a simple code to put a LED light on, the code is:
Code:
/* redlight.c Turn red lightdiode at pin RB0 ON! */
#include "16F628.h"
#pragma config |= 0x3fb0
#define ON 1
#define OFF 0
#pragma bit lightdiode @ PORTB.0
void main( void)
{
lightdiode = ON;
TRISB = 0b11111110; /* RB0 out, RB1 in */And when I try to build it I get this error message.
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\Program Files (x86)\Microchip\MPASM Suite\mplink.exe" /o "lysdiod3.HEX"
MPLINK 4.37, Linker
Copyright (c) 1998-2010 Microchip Technology Inc.
Error - linker command file required.
Errors : 1
Link step failed.
BUILD FAILED: Tue Jan 14 12:22:38 2014
Tryed to google it but with no luck.. So can someone help me with this problem?
Thanks!