Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem with different types of discrete ports

Status
Not open for further replies.
S

shruti2srivastava

Newbie level 1
Joined
Jun 5, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Hi,

I have simulated one lumped series LC circuit with follwing three types of discrete ports:

1) S-parameter source with impedance of 50 ohm
2) Voltage source of 1 Volt
3) Current source of 1 amp.

In 1D results, I am getting that resoance positions are almost similar for S- parameter type source and voltage source while it is different when the current source is connected. Can anyone tell me the reason about this??
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top