Advark
Member level 3
- Joined
- Feb 22, 2008
- Messages
- 66
- Helped
- 1
- Reputation
- 2
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- POA, Brazil-RS
- Activity points
- 1,684
Hi, i have a problem plotting Q in cadence.
I made a passband filter with an active inductor. I simulate s-parameters in spectre simulator
I assume that quality factor Q is equal to = imag(aaSP(2 1))/real(aaSP(2 1)) when i plotted i obtein a sort of bell like the response of a typical bandpass filter.
My question is i assume wrong the value of Q ? and i should be simulate my circuit in SpectreS.
The version of cadence i use is
Cadence version 5.10.41.500.3.49
Process c35b4
HIT kit 3.70.17.05
I made a passband filter with an active inductor. I simulate s-parameters in spectre simulator
I assume that quality factor Q is equal to = imag(aaSP(2 1))/real(aaSP(2 1)) when i plotted i obtein a sort of bell like the response of a typical bandpass filter.
My question is i assume wrong the value of Q ? and i should be simulate my circuit in SpectreS.
The version of cadence i use is
Cadence version 5.10.41.500.3.49
Process c35b4
HIT kit 3.70.17.05