Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem in port accesing

Status
Not open for further replies.
T

thangaduraibeece

Junior Member level 2
Joined
Jul 4, 2008
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,419
HI,
i want to do a time critical tasks in turboc which also involves the RS232 port communication.Since i faced a time issue, i had a thought that this may due to running c in windows mode in which so many other application may utilize the CPU and may become soft real system.So i planned to run it in DOS mode....Here the RS232 COM Port is not opened and i couldn't do further.Could any one help me on this....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top