Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem in output of my acquisition card 'EAGLE'

Status
Not open for further replies.
O

omar-malek

Member level 5
Member level 5
Joined
Mar 24, 2007
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
French
Activity points
1,949
i have a problem in my acqsition card, the problem is happned when i send a waveform signal (array of points) to output of card , i receive a message: error(-1) > error call function, i try an other solution where i send the signal point per point but i have an other broblem in the desired frequency (wanted freq)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top